70-410 Practice Exam Questions and Answers Sample Papers Shared By Braindump2go 91-105

Download Microsoft Exam Center Latest Updated 70-410 Exam Questions from Braindump2go for free now! Braindump2go 70-410 Dumps Questions ans Answers are the Latest and also provide free updation for all Exam Dumps! Guarantee 100% Exam Pass Or Money Back!

Vendor: Microsoft
Exam Code: 70-410
Exam Name: Installing and Configuring Windows Server 2012 R2 Exam

1[14]

QUESTION 91
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?

wpsDD20.tmp_thumb

A.    Delete partition E.
B.    Convert Disk 1 to a GPT disk
C.    Convert Disk 1 to a dynamic disk.
D.    Take Disk 1 offline.

Answer: D
Explanation:
Pass-Through Disk must be offline
Pass-through Disk Configuration
Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring thevolume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be aStorage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest hasexclusive access to the storage, it must be placed in an Offline state from the Hyper-V serverperspective
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-inhyper- v.aspx
http://technet.microsoft.com/pt-pt/library/ff404147%28v=ws.10%29.aspx

QUESTION 92
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server2 runs Windows Server 2012 R2.
You create a security template named Template 1 by using the Security Templates snap-in.
You need to apply template 1 to Server 2.
Which tool should you use?

A.    Security Templates.
B.    Computer Management.
C.    Security Configuration and Analysis.
D.    System Configuration.

Answer: C
Explanation:
Security templates are inactive until imported into a Group Policy object or the Security Configurationand Analysis.

wps72D.tmp_thumb

http://technet.microsoft.com/en-us/library/jj730960.aspx
http://windows.microsoft.com/en-us/windows-vista/using-system-configuration

QUESTION 93
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DCS. DC5 has a Server Core Installation of Windows Server 2012 R2. You need to uninstall Active Directory from DC5 manually.
Which tool should you use?

A.    The ntdsutil.exe command
B.    The dcpromo.exe command
C.    The Remove-WindowsFeaturecmdlet
D.    The Remove-ADComputercmdlet

Answer: C
Explanation:
Explanation/Reference:
http://technet.microsoft.com/en-us/library/hh472163.aspx#BKMK_RemoveSM
http://technet.microsoft.com/en-us/library/cc732257.aspx#BKMK_powershell

QUESTION 94
You have a server named Server 2 that runs Windows Server 2012 R2. Server 2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button).
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1. What should you do?

wps6CB4.tmp_thumb

A.    Convert Disk 1 to a MBR disk.
B.    Convert Disk 1 to a basic disk.
C.    Take Disk 1 offline.
D.    Create a partition on Disk 1.

Answer: C
Explanation:
Pass-through Disk Configuration
Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-V server perspective
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx

QUESTION 95
You have a file server named Server1 that runs Windows Server 2012 R2.
Server1 has following hardware configurations:
– 16GB of RAM
– A single quad-core CPU
– Three network teams that have two network adapters each
You add additional CPUs and RAM to Server 1.
You repurpose Server1 as a virtualization host.
You install the Hyper-V server role on Server1. You need to create four external virtual switches in Hyper-V.
Which cmdlet should you run first?

A.    Set-NetAdapter.
B.    Add-Net1.bfoTeamNic
C.    Add-VMNetworkAdapter
D.    Remove-NetLbfoTeam

Answer: D
Explanation:
A. Sets adapter properties
B. Add new interface to NIC Team
C. Adds vadapter to vm
D. Removed NIC from host
You need 4 virtual switches but currently only have 3 teams available.
You would need to break a team first.
http://technet.microsoft.com/en-us/library/jj130875(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj130850(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh848564(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj130848(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj130848.aspx

QUESTION 96
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the Security Templates snap-in.
You need to apply Template1 to Server2.
Which tool should you use?

A.    Authorization Manager
B.    Local Security Policy
C.    Certificate Templates
D.    System Configuration

Answer: B
Explanation:
A security policy is a combination of security settings that affect the security on a computer.
You can use your local security policy to edit account policies and local policies on your local computer.

QUESTION 97
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012 R2. On DC2, you open Server Manager and you add Server1 as another server to manage. From Server Manager on DC2, you right-click Server1 as shown in the exhibit.
You need to ensure that when you right-click Server1, you see the option to run the DHCP console.
What should you do?

wps96B2.tmp_thumb

A.    On Server1, install the Feature Administration Tools.
B.    In the domain, add DC1 to the DHCP Administrators group.
C.    On DC2 and Server1, run winrm quickconfig.
D.    On DC2, install the Role Administration Tools.

Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/hh831825.aspx

QUESTION 98
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server 2012.
You create a group Manged Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?

A.    From a command prompt, run sc.exe and specify the config parameter.
B.    From Windows PowerShell,run Set-Service and specify the -PassThrough parameter
C.    From Windows PowerShell,run Set-Service and specify the -StartupType parameter
D.    From Services Console configure the General settings

Answer: A

QUESTION 99
Your network contains an Active Directory domain named contoso.com. An organizational unit (OU) named OU1 contains user accounts and computer accounts. A Group Policy object (GPO) named GP1 is linked to the domain. GP1 contains Computer Configuration settings and User Configuration settings.
You need to prevent the User Configuration settings in GP1 from being applied to users.
The solution must ensure that the Computer Configuration settings in GP1 are applied to all client computers.
What should you configure?

A.    the Group Policy loopback processing mode
B.    the Block Inheritance feature
C.    the Enforced setting
D.    the GPO Status

Answer: A
Explanation:
A. Group Policy loopback with replace option needs to be used
B. Blocking inheritance prevents Group Policy objects (GPOs) that are linked to higher sites, domains, ororganizational units from being automatically inherited by the child-level
C. Enforced prevent blocking at lower level
D. The GPO Status. This indicates whether either the user configuration or computer configuration of the GPOis enabled or disabled.
You can use the Group Policy loopback feature to Apply Group Policy Objects (GPOs) that depend only onwhich computer the user logs on to.
User Group Policy loopback processing can be enabled in one of two modes: merge or replace. In mergemode, both GPOs Applying to the user account and GPOs Applying to the computer account are processedwhen a user logs in. GPOs that Apply to the computer account are processed second and therefore takeprecedence – if a setting is defined in both the GPO(s) Applying to the user account, and the GPO(s) Applyingto the computer account, the setting in the GPO(s) Applying to the computer account will be enforced. With thereplace mode, GPOs Applying to the user account are not processed only the GPOs Applying to thecomputer account are Applied. Loopback can be set to Not Configured, Enabled, or Disabled. In the Enabled state, loopback can be set toMerge or Replace. In either case the user only receives user-related policy settings. Loopback with Replace–In the case of Loopback with Replace, the GPO list for the user is replaced in itsentirety by the GPO list that is already obtained for the computer at computer startup (during step 2 in GroupPolicy processing and precedence). The User Configuration settings from this list are Applied to the user.
Loopback with Merge–In the case of Loopback with Merge, the Group Policy object list is a concatenation.
The default list of GPOs for the user object is obtained, as normal, but then the list of GPOs for the computer(obtained during computer startup) is appended to this list. Because the computer’s GPOs are processed afterthe user’s GPOs, they have precedence if any of the settings conflict. This is a COMPUTER setting, which is found under Computer Configuration | Administrative Templates |
System | Group Policy | User Group Policy Loopback Processing Mode You want to create a new OU in AD that is dedicated to computer accounts that will have loopbackprocessing enabled. Create a new GPO in your new OU to enable User Group Policy Loopback Processing and set theappropriate mode (merge / replace).
You will define the user settings you want to Apply to the loopback-enabled PCs via GPOs in this same newOU.
You can define these settings either in the same GPO where you enabled the User Group PolicyLoopback Processing setting, or you create another new GPO in the same OU for your user settings.
Remember that when using the REPLACE mode, none of your other user GPOs will be Applied whena user logs in to a machine that has loopback processing enabled.
ONLY the user settings that aredefined in the GPOs that Apply to that machine will be Applied.
http://msmvps.com/blogs/cgross/archive/2009/10/12/group-policy-loopbackprocessing.aspx http://technet.microsoft.com/en-us/library/cc782810(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731076.aspx
http://technet.microsoft.com/en-us/library/cc753909.aspx
http://technet.microsoft.com/en-us/library/cc778238%28v=ws.10%29.aspx http://technet.microsoft.com/en-us/magazine/dd673616.aspx

QUESTION 100
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1.
Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?

A.    Router guard
B.    DHCP guard
C.    Port mirroring
D.    MAC address

Answer: D
Explanation:
In Hyper-V, the VM host prevents dynamic MAC address updates as an extra layer of security in thedatacenter. This is because the VM may have full administrator rights, yet it may be untrusted in thedatacenter, for example when the VM hosting is provided by an independent hosting company. In this scenario,we need to make sure that one VM cannot cause a DOS or information disclosure attack against another VM. If a VM is able to spoof its MAC address, then it can spoof the MAC addresses of other VMs and impactother VMs on that host. The physical switches have similar protections and it is up to the admin to enable thatprotection or not. If you do not enable spoofing of MAC address prior to configuring NLB on the VM you could potentially haveproblems with the NLB cluster.
When configuring NLB in unicast mode on Hyper-V with enable spoofing of MAC Address disabled you maysee some of the following symptoms:
When initially configuring NLB you will lose network connectivity on the network adaptor NLB was configuredon.
There will be an NLB error event in the Windows Event Log stating that the network adaptor does not supportdynamic MAC address updates.
After rebooting the server, NLB will appear to be bound to the network adapter, but the cluster VIP will nothave been added to the network adaptor.
The cluster MAC address will still be the original MAC address associated with the network adaptor prior toconfiguring NLB. Use CMD>ipconfig /all to view the MAC address.
It should start with “02-BF-***”
If you ignore all previous symptoms and manually add the VIP you could get an IP conflict if there are othernodes in the cluster that have the same VIP.
With that said, to allow VM guests to run NLB you need to set the VM property for “Enable spoofing of MACAddress”.
To enable spoofing of MAC Addresses open the Hyper-V management console. Make sure the VM is stoppedopen the properties of the VM. Select the Network Adaptor for the NLB VM and check the “Enable spoofing ofMAC Address” and click OK. Then start the VM.

QUESTION 101
Your network contains a Windows Server 2012 R2 image named Server12.wim.
Server12.wim contains the images shown in the following table.

wpsCE46.tmp_thumb

Server12.wim is located in C:\.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012  R2 Server Datacenter image.
You want to achieve this goal by using the minimum amount of Administrative effort.
Which command should you run first?

A.    dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
B.    imagex.exe /capture c: c:\Server12.wim “windows server 2012server datacenter”
C.    dism.exe /image: c:\Server12.wim /enable-feature /featurename: servermigration
D.    imagex.exe /apply c:\Server12.wim 4 c:\

Answer: A
Explanation:
A. Mounts the image before making any chnages
B. imagex /capture creates windows images .wim
C. You need to mount the image first
D. imagex /Apply Applies image to drive
The Deployment Image Servicing and Management (DISM) tool is a command-line tool that is used to modifyWindows images.
You can use DISM to enable or disable Windows features directly from the commandprompt, or by Applying an answer file to the image.
You can enable or disable Windows features offline on a WIM or VHD file, or online on a running operating system.
You can also use the DISM image management command to list the image index numbers or to verify thearchitecture for the image that you are mounting.ex:
Dism /Mount-Image /ImageFile:C:\test\images\install.wim /Name:”Base Windows Image”
/MountDir:C:\test\offline
By default, DISM is installed at C:\Program Files (x86)\Windows Kits\8.0\Assessment and
Deployment Kit\Deployment Tools\
http://technet.microsoft.com/en-us/library/hh824822.aspx
http://technet.microsoft.com/en-us/library/hh825258.aspx
http://technet.microsoft.com/en-us/library/cc749447(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744382(v=ws.10).aspx

QUESTION 102
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1.
Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create a virtual machine named VM1.
When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is unavailable as shown in the following exhibit.

wpsF547.tmp_thumb

You need to add the RemoteFX 3D Video Adapter to VM1.
What should you do first?

A.    On Server1, run the Enable-VMRemoteFxPhysicalVideoAdapter cmdlet.
B.    On Server1, install the Media Foundation feature.
C.    On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet.
D.    On Server1, install the Remote Desktop Virtualization Host (RD Virtualization Host) role service.

Answer: D
Explanation:
A. Enables one or more RemoteFX physical video adapters for use with RemoteFX-enabled virtual machines.
B.
C. Adds a RemoteFX video adapter in a virtual machine.
D. Role must be added for host first
TM is included as part of the Remote Desktop Virtualization Host role service, and it
Microsoft?RemoteFX
enables the delivery of a full Windows user experience to a range of client devices including rich clients, thin clients, and ultrathin clients. RemoteFX renders content by using graphics processing units (GPUs) that are present on the server and then shared across multiple virtual desktops. RemoteFX renders a range of content including DirectX and all types of multimedia, and it is optimized for LAN-based networks. The number of monitors and their maximum resolution determines the amount of GPU memory on the server required by RemoteFX. This consideration is important in determining the scale for how many virtual machines a Remote Desktop
Virtualization Host server can support.
http://technet.microsoft.com/en-us/library/hh848506(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh848520(v=wps.620).aspx http://technet.microsoft.com/en-us/library/ff817586(v=ws.10).aspx

QUESTION 103
Your network contains an Active Directory domain named contoso.com. The network contains a domain controller named DC1 that has the DNS Server server role installed.
DC1 has a standard primary DNS zone for contoso.com.
You need to ensure that only client computers in the contoso.com domain will be able to add their records to the contoso.com zone.
What should you do first?

A.    Modify the Security settings of Dc1
B.    Modify the Security settings of the contoso.com zone.
C.    Store the contoso.com zone in Active Directory
D.    Sign the contoso.com zone.

Answer: C
Explanation:
C. Only Authenticated users can create records when zone is stored in AD Secure dynamic updates allow an administrator to control what computers update what names and preventunauthorized computers from overwriting existing names in DNS. If you have an Active Directory infrastructure, you can only use Active Directory – integrated zones on ActiveDirectory domain controllers. If you are using Active Directory – integrated zones, you must decide whether or not to store Active Directory – integrated zones in the Application directory partition.
To configure computers to update DNS data more securely, store DNS zones in Active Directory DomainServices (AD DS) and use the secure dynamic update feature. Secure dynamic update restricts DNS zone updates to only those computers that are authenticated and joinedto the Active Directory domain where the DNS server is located and to the specific security settings that
aredefined in the access control lists (ACLs) for the DNS zone.
http://technet.microsoft.com/en-us/library/cc731204(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755193.aspx
http://technet.microsoft.com/en-us/library/cc786068%28v=ws.10%29.aspx

QUESTION 104
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

wps3574.tmp_thumb[2]

You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?

A.    NUMA topology
B.    Resource control
C.    resource metering
D.    virtual Machine Chimney
E.    the VLAN ID
F.    Processor Compatibility
G.    the startup order
H.    Automatic Start Action
I.    Integration Services
J.    Port mirroring
K.    Single-root I/O virtualization

Answer: J
Explanation:
J. With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic

wps71C8.tmp_thumb

http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror

QUESTION 105
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.

wps916A.tmp_thumb[2]

You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?

A.    NUMA topology
B.    Resource control
C.    resource metering
D.    virtual Machine Chimney
E.    the VLAN ID
F.    Processor Compatibility
G.    the startup order
H.    Automatic Start Action
I.    Integration Services
J.    Port mirroring
K.    Single-root I/O virtualization

Answer: I
Explanation:
What is the Hyper-V Saved State?
Some Hyper-V virtual machines briefly go offline into a “Saved State” at the initial phase of a backup.
While the backup is running, they usually come back online after a couple of seconds. Background KnowledgeThe decision to pull Hyper-V virtual machines offline into a Saved State is done solely within Hyper-VManagement Services.
Backup software utilities have no way to force a live backup when Hyper-V determines it can’t and shouldn’t bedone.There are many factors that are considered by Hyper-V when it decides whether to take a VM offline or not,Hyper-V Live Backup Requirements:
To achieve zero downtime live backups of virtual machines, you need the following conditions met:
1. The VM guest needs to have Integration Services installed, enabled, and running (COM+ System Application Service, Distributed Transaction Coordinator Service, and Volume Shadow Copy Service). Alsoreview the VM settings in Hyper-V, the ‘backup’ option needs to be checked.
2. All disks involved need to be formatted with NTFS, including the disks within the VM.
3. The Volume Shadow Copy Service and related VSS services need to be enabled and running.
4. The shadow copy storage space for each drive must be available to Hyper-V VSS Writer and be located atthe same volume. For instance, the storage space for drive C: needs to be on drive C: itself, and so on. Usethe VSSADMIN command from the command line to check the settings. (Use:
vssadmin list shadowstorage /vssadmin resize shadowstorage)
5. Ensure the VMs are partitioned using ‘basic disk’ formatting.
At the moment Hyper-V does not support livebackup for VMs formatted using dynamic disk partitioning or GPT.
7. Ensure you have at least about 20% free space on each drive involved, such as the drive on the host andthe VM’s main system drive.
8. Ensure plenty of un-fragmented RAM is available on the host. If a machine is pulled into Saved State, Hyper-V may not be able to bring the VM back online if it can’t allocate a continuous block of RAM. Note that theremay be sufficient total RAM available but not enough to place a single block. You should therefore aim to keepat least 512 MB to 1 GB of RAM free when all VMs are powered up.

wpsCD61.tmp_thumb

http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx http://backupchain.com/Understanding-Saved-State-Hyper-V-Backup.html


Thanks For Trying Braindump2go Latest Microsoft 70-410 Dumps Questions! Braindump2go Exam Dumps ADVANTAGES:

☆ 100% Pass Guaranteed Or Full Money Back!
☆ Instant Download Access After Payment!
☆ One Year Free Updation!
☆ Well Formated: PDF,VCE,Exam Software!
☆ Multi-Platform capabilities – Windows, Laptop, Mac, Android, iPhone, iPod, iPad.
☆ Professional, Quick,Patient IT Expert Team 24/7/365 Onlinen Help You!
☆ We served more than 35,000 customers all around the world in last 5 years with 98.99% PASS RATE!
☆ Guaranteed Secure Shopping! Your Transcations are protected by Braindump2go all the time!
☆ Pass any exams at the FIRST try!

1[10]

http://www.braindump2go.com/70-410.html