[2015 100% PASS ALL EXAMS] New Updated Version: Free Microsoft 70-417 Dumps From Braindump2go 100% Guarantee Your Success (351-360)

2015 Free Download of Latest Microsoft 70-417 Practce Exam Questions from Braindump2go will help you have a 100% success of 70-417 real exam! All questions are the latest checked and released! Answers are 100% correct guaranteed! In order to increase your confidence, 100% Full Money Back Guarantee is promised by Braindump2go! Instant Download Now!
Vendor: Microsoft
Exam Code: 70-417
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012 R2 Exam

292222223222

QUESTION 351
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. The domain contains a standalone server named Server2 that is located in a perimeter network. Both servers run the default installation of Windows Server 2012 R2.
You need to manage Server2 remotely from Server1.
What should you do?

A.    From Server1, run the Enable-PsRemotingcmdlet.
B.    From Server2, run the winrm command.
C.    From Server2/ run the Enable-PsRemotingcmdlet.
D.    From Server1, run the winrm command.

Answer: D

QUESTION 352
You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)

wps16BD.tmp_thumb

You need to create a storage pool that contains Disk 1 and Disk 2.
What should you do first?

A.    Convert Disk 1 and Disk 2 to GPT disks
B.    Create a volume on Disk 2
C.    Convert Disk 1 and Disk 2 to dynamic disks
D.    Delete volume E

Answer: D
Explanation:
Storage Pools use unallocated space thus you need to delete Volume E.
http://technet.microsoft.com/en-us/library/ff399688.aspx

QUESTION 353
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Network Policy Server server role installed. The domain contains a server named Server2 that is configured for RADIUS accounting.
Server1 is configured as a VPN server and is configured to forward authentication requests to Server2.
You need to ensure that only Server2 contains event information about authentication requests from connections to Server1.
Which two nodes should you configure from the Network Policy Server console? To answer, select the appropriate two nodes in the answer area.

wps3B2F.tmp_thumb

Answer:

wps54D7.tmp_thumb

QUESTION 354
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, an administrator creates a virtual machine named VM1.
A user named User1 is the member of the local Administrators group on Server1.
User1 attempts to modify the settings of VM1 as shown in the following exhibit. (Click the Exhibit button.)

wps6E03.tmp_thumb

You need to ensure that User1 can modify the settings of VM1 by running the Set- Vmcmdlet.
What should you instruct User1 to do?

A.    Run Windows PowerShell with elevated privileges.
B.    Install the Integration Services on VM1.
C.    Modify the membership of the local Hyper-V Administrators group.
D.    Import the Hyper-V module.

Answer: A
Explanation:
You can only use the PowerShell snap-in to modify the VM settings with the vmcmdlets when you are an Administrator.
Thus best practices dictate that User1 run the Powershell with elevated privileges.
http://technet.microsoft.com/en-us/library/jj713439.aspx

QUESTION 355
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
HVServer1 hosts two virtual machines named Server1 and Server2.
Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)

A.    Get-VM “Server2” | Set-VMNetworkAdapter -IovWeight 1
B.    Get-VM “Server1” | Set-VMNetworkAdapter -Allow/Teaming On
C.    Get-VM “Server1” | Set-VMNetworkAdapter -PortMirroring Source
D.    Get-VM “Server2” | Set-VMNetworkAdapter -PortMirroring Destination
E.    Get-VM “Server1” | Set-VMNetworkAdapter -IovWeight 0
F.    Get-VM “Server2” | Set-VMNetworkAdapter-AllowTeaming On

Answer: CD
Explanation:
* Get-VM will get the virtual machines from one or more Hyper-V hosts.
-ComputerName<String[]> is used to specify one or more Hyper-V hosts from which virtual machines are to be retrieved. NetBIOS names, IP addresses, and fully-qualified domain names are allowable. The default is the local computer — use “localhost” or a dot (“.”) to specify the local computer explicitly.
* Set-VMNetworkAdapter is used to configure features of the virtual network adapter in a virtual machine or the management operating system.
-PortMirroring<VMNetworkAdapterPortMirroringMode> is used to specify the port mirroring mode for the network adapter to be configured.
With Port Mirroring, traffic sent to or from a Hyper-V Virtual Switch port is copied and sent to a mirror port. There are a range of applications for port mirroring – an entire ecosystem of network visibility companies exist that have products designed to consume port mirror data for performance management, security analysis, and network diagnostics. With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic.
http://technet.microsoft.com/en-us/library/jj679878.aspx

QUESTION 356
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB).
Which virtual machine settings should you configure on VM1 and VM2?

A.    DHCP guard
B.    MAC address
C.    Router guard
D.    Port mirroring

Answer: B
Explanation:
When MAC addresses are not assigned to virtual machines, it could cause network problems.
http://blogs.msdn.com/b/clustering/archive/2010/07/01/10033544.aspx

QUESTION 357
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit.
(Click the Exhibit button.)

wpsAA97.tmp_thumb

You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?

A.    BIOS
B.    Automatic Stop Action
C.    Automatic Start Action
D.    Integration Services

Answer: B
Explanation:
The Automatic Stop Action setting should be modified because it will allow you to configure:
“Save the virtual machine state” option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR “Turn Off the virtual machine” is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine. OR “Shut down the guest operating system” is successful only if the “Hyper-V Shutdown” guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/

QUESTION 358
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations:
– Connection type: External network
– Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?

A.    Remove Switch1 and recreate Switch1 as an internal network.
B.    Change the Connection type of Switch1 to Private network.
C.    Change the Connection type of Switch1 to Internal network.
D.    Remove Switch1 and recreate Switch1 as a private network.

Answer: B
Explanation:
You can change the connection type of a virtual switch from the virtual switch manager without having to remove it. A private virtual network is isolated from all external network traffic on the virtualization server, as well any network traffic between the management operating system and the external network. This type of network is useful when you need to create an isolated networking environment, such as an isolated test domain.
http://technet.microsoft.com/en-us/library/cc816585%28v=WS.10%29.aspx
http://blogs.technet.com/b/jhoward/archive/2008/06/17/hyper-v-what-are-the-uses-for-different-types-of-virtual-networks.aspx

QUESTION 359
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?

A.    BIOS
B.    Network Adapter
C.    COM 1
D.    Processor

Answer: C
Explanation:
Named pipes can be used to connect to a virtual machine by configuring COM 1.
http://support.microsoft.com/kb/819036
http://support.microsoft.com/kb/141709

QUESTION 360
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?

A.    From Server Manager, change the load balancing mode of Team1.
B.    Run the New-NetLbfoTeamcmdlet.
C.    From Server Manager, add an interface to Team1.
D.    Run the Add-NetLbfoTeamMembercmdlet.

Answer: C


Braindump2go Guarantee:
Pass-Certification 70-417 offers absolute risk free investment opportunity, values your timr and money! Braindump2go latest 70-417 Real Exam Dumps – Your success in 70-417 Exam is certain! Your belief in our 70-417 Exam Dumps is further strengthened with 100% Money Back Promise from Braindump2go!

2922222243222

http://www.braindump2go.com/70-417.html